Dell S6100, Руководство по настройке

Страница: 1270 / 1743

Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Added the DSCP Marking option support on the S-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series; added support for the DSCP Marking option.
6.1.1.1 Introduced on the E-Series.
Usage Information To access this command, enter the
class-map
command. After the class map is identified, you can configure the
match criteria. For class-map match-any, a maximum of five ACL match criteria are allowed. For
class-map
match-all
, only one ACL match criteria is allowed.
Related Commands
• class-map — identifies the class map.
match ip dscp
Use a differentiated services code point (DSCP) value as a match criteria.
Syntax match {ip | ipv6 | ip-any} dscp dscp-list [set-ip-dscp value ]
To remove a DSCP value as a match criteria, use the
no match {ip | ipv6 | ip-any} dscp dscp-
list [[multicast] set-ip-dscp value ]
command.
Parameters
ip Enter the keyword
ip
to support IPv4 traffic.
ipv6 Enter the keyword
ipv6
to support IPv6 traffic.
ip-any Enter the keyword ip-any to support IPv4 and IPv6 traffic.
dscp-list Enter the IP DSCP values that is to be the match criteria. Separate values by commas —
no spaces ( 1,2,3 ) or indicate a list of values separated by a hyphen (1-3). The range is
from 0 to 63.
1270 Quality of Service (QoS)