Dell S6100, Руководство по настройке

Страница: 656 / 1743

ip igmp snooping fast-leave
Enable IGMP snooping fast-leave for this VLAN.
Syntax ip igmp snooping fast-leave
To disable IGMP snooping fast leave, use the
no igmp snooping fast-leave
command.
Defaults Not configured.
Command Modes INTERFACE VLAN — (conf-if-vl- n )
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.2(0.0) Introduced on the M I/O Aggregator. This command is supported in Programmable-Mux
(PMUX) mode only.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series legacy
command.
Usage Information Queriers normally send some queries when a leave message is received prior to deleting a group from the
membership database. There may be situations when you require a fast deletion of a group. When you enable
IGMP fast leave processing, the switch removes an interface from the multicast group as soon as it detects an
IGMP version 2 leave message on the interface.
656 Internet Group Management Protocol (IGMP)