Dell S6100, Руководство по настройке

Страница: 162 / 1743

If a device does not respond within 30 seconds, it is assumed that the device is not 802.1X capable. Therefore, a
guest VLAN is allocated to the interface and authentication, for the device, occurs at the next reauthentication
interval (
dot1x reauthentication
).
If the host fails authentication for the designated number of times, the authenticator places the port in
authentication failed VLAN (
dot1x auth-fail-vlan ).
NOTE: You can create the Layer 3 portion of a guest VLAN and authentication fail VLANs regardless if
the VLAN is assigned to an interface or not. After an interface is assigned a guest VLAN (which has an
IP address), routing through the guest VLAN is the same as any other traffic. However, the interface
may join/leave a VLAN dynamically.
Related Commands
• dot1x auth-fail-vlan — Configure an authentication failure VLAN.
• dot1x reauthentication — Enable periodic re-authentication of the client.
• dot1x reauth-max —
Configure the maximum number of times to re-authenticate a port before it becomes unauthorized
dot1x host-mode
Enable single-host or multi-host authentication.
Syntax dot1x host-mode {single-host | multi-host | multi-auth}
Parameters
single-host Enable single-host authentication.
multi-host Enable multi-host authentication.
multi-auth Enable multi-supplicant authentication.
Defaults single-host
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
162 802.1X