Dell S6100, Руководство по настройке

Страница: 1724 / 1743

Version Description
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.1 Introduced on the E-Series.
Usage Information
The VRRP group only becomes active and sends VRRP packets when you configure a virtual IP address. When you
delete the virtual IP address, the VRRP group stops sending VRRP packets.
Related Command
• virtual-address — assigns up to 12 virtual IP addresses per VRRP group.
version
Set the VRRP protocol version for the IPv4 group.
Syntax version {2 | 3 | both}
To return to the default setting, use the
no version
command.
Parameters
2 Enter the keyword
2
to specify VRRP version 2 as defined by RFC 3768, Virtual Router
Redundancy Protocol .
3 Enter the keyword
3
to specify VRRP version 3 as defined by RFC 5798, Virtual Router
Redundancy Protocol .
both Enter the keyword
both
for in-service migration from VRRP version 2 to VRRP version 3.
Defaults 2
Command Modes VRRP
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.5(0.0) Introduced on the Z9000, S6000, S4820T, S4810, and MXL.
1724 Virtual Router Redundancy Protocol (VRRP)