Dell S6100, Руководство по настройке

Страница: 912 / 1743

Version Description
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.1 Introduced on the E-Series.
Related Commands
• show lacp — display the LACP configuration.
debug lacp
Debug LACP (configuration, events, and so on).
Syntax debug lacp [config | events | pdu [ interface-type [in | out]]]
To disable LACP debugging, use the
no [config | events | pdu [ interface-type [in | out]]]
command.
Parameters
config (OPTIONAL) Enter the keyword config to debug the LACP configuration.
events (OPTIONAL) Enter the keyword
events
to debug the LACP event information.
pdu (OPTIONAL) Enter the keyword
pdu
to debug the LACP Protocol Data Unit information.
interface-type in |
out
(OPTIONAL) Enter the following keywords and the interface information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then
the stack/slot/port/subport information.
• For a 25-Gigabit Ethernet interface, enter the keyword
twentyFiveGigE
then the
stack/slot/port/subport information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
then the stack/
slot/port[/subport] information.
• For a 50-Gigabit Ethernet interface, enter the keyword
fiftyGigE
then the stack/
slot/port/subport information.
• For a 100-Gigabit Ethernet interface, enter the keyword
hundredGigE
then the
stack/slot/port information.
Optionally, enter an
in
or
out
parameter:
• Receive enter
in
912 Link Aggregation Control Protocol (LACP)