Dell S6100, Руководство по настройке

Страница: 1271 / 1743

set-ip-dscp value (OPTIONAL) Enter the keywords
set-ip-dscp
then the IP DSCP value. The matched
traffic is marked with the DSCP value. The range is from 0 to 63.
Defaults none
Command Modes CLASS-MAP CONFIGURATION (config-class-map)
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.0) Added the ipv6 and ip-any options on the Z9000, S6000, S4820T, S4810, MXL.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Added the keyword
multicast
; added the
DSCP
Marking option support on the S-
Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series; added support for the DSCP Marking option.
6.2.1.1 Introduced on the E-Series.
Usage Information
To access this command, enter the
class-map
command. After the class map is identified, you can configure the
match criteria.
The
match ip dscp
and
match ip precedence
commands are mutually exclusive.
Up to 64 IP DSCP values can be matched in one match statement. For example, to indicate IP DCSP values 0 1 2 3
4 5 6 7, enter either the
match ip dscp 0,1,2,3,4,5,6,7
or
match ip dscp 0-7
command.
NOTE: Only one of the IP DSCP values must be a successful match criterion, not all of the specified IP
DSCP values must match.
Related Commands
• class-map — identifies the class map.
Quality of Service (QoS) 1271