Version
Description
9.8(0.0P5)
Introduced on the S4048-ON.
9.8(0.0P2)
Introduced on the S3048-ON.
9.7(0.0)
Introduced on the S4810, S4820T, S5000, S6000, S6000–ON, and Z9000 switches.
Related Commands
•
— configure the RA guard related commands.
ipv6 neighbor
Configure a static entry in the IPv6 neighbor discovery.
Syntax
ipv6 neighbor [vrf
vrf-name
] {
ipv6-address
} {interface
interface
}
{
hardware_address
}
To remove a static IPv6 entry from the IPv6 neighbor discovery, use the
no ipv6 neighbor [vrf
vrf-
name
] {
ipv6-address
} {interface
interface
}
command.
Parameters
vrf
vrf-name
(Optional) Enter the keyword vrf followed by the name of the VRF to install IPv6 routes in
that VRF.
ipv6-address
Enter the IPv6 address of the neighbor in the x:x:x:x::x format.
NOTE:
The :: notation specifies successive hexadecimal fields of zero.
interface
interface
Enter the keyword
interface
then the interface type and slot/port or number
information:
•
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then
the stack/slot/port/subport information.
•
For a 25-Gigabit Ethernet interface, enter the keyword
twentyFiveGigE
then the
stack/slot/port/subport information.
•
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
then the stack/
slot/port[/subport] information.
•
For a 50-Gigabit Ethernet interface, enter the keyword
fiftyGigE
then the stack/
slot/port/subport information.
•
For a 100-Gigabit Ethernet interface, enter the keyword
hundredGigE
then the
stack/slot/port information.
•
For a Loopback interface, enter the keyword
loopback
then a number from 0 to
16383.
•
For a port channel interface, enter the keywords
port-channel
then a number.
•
For a Null interface, enter the keyword null then the Null interface number.
•
For a VLAN interface, enter the keyword
vlan
then a number from 1 to 4094.
•
For a tunnel interface, enter the keyword
tunnel
then the tunnel interface number.
The range is from 1 to 16383.
hardware_address
Enter a 48-bit hardware MAC address in nn:nn:nn:nn:nn:nn format.
Neighbor Discovery Protocol (NDP)
1033
Содержание S6100
Страница 1: ...Dell Command Line Reference Guide for the S6100 ON System 9 11 2 0P1 ...
Страница 474: ...protocol list ttl0 ttl1 Dell 474 Control Plane Policing CoPP ...
Страница 979: ... show lldp neighbors display the LLDP neighbors Link Layer Discovery Protocol LLDP 979 ...
Страница 1627: ... uplink state group creates an uplink state group and enables the tracking of upstream links Uplink Failure Detection UFD 1627 ...
