Dell S6100, Руководство по настройке

Страница: 1477 / 1743

protocol-tunnel
Enable protocol tunneling on a stacked (Q-in-Q) VLAN for specified protocol packets.
Syntax protocol-tunnel {rate-limit rate | stp}
To disable protocol tunneling for a Layer 2 protocol, use the
no protocol-tunnel
command.
Parameters
rate-limit rate Enter the keyword
rate-limit
followed by a number for the rate-limit for tunneled
packets on the VMAN. The range is from 64 to 320.
stp Enter the keyword stp to enable protocol tunneling on a spanning tree, including STP,
MSTP, RSTP, and PVST.
Defaults none
Command Modes CONF-IF-VLAN
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.11.1 Introduced on the Z9000.
8.5.1.1 Added support for
802.1X
,
E-LMI
,
GMRP
,
GVRP
,
LLDP
,
LACP
,
MMRP
,
MVRP
, and
OAM
802.3ah
protocol traffic to the E-Series.
8.2.1.0 Introduced on the C-Series, E-Series, and E-Series.
7.4.1.0 Introduced
Example
Dell# conf
Dell(conf)#interface vlan 2
Dell(conf-if-vl-2)#vlan-stack compatible
Dell(conf-if-vl-2)#member Te 1/1/2/1-1/1/2/3
Dell(conf-if-vl-2)#protocol-tunnel stp
Dell(conf-if-vl-2)#protocol-tunnel enable
Related Command
• show protocol-tunnel — displays tunneling information for all VLANs.
Service Provider Bridging 1477