Dell S6100, Руководство по настройке

Страница: 85 / 1743

Control and Monitoring
This section contains command information to configure and monitor the system, including Telnet, file transfer protocol (FTP), and trivial
file transfer protocol (TFTP).
banner exec
Configure a message that is displayed when your enter EXEC mode.
Syntax banner exec c line c
To delete a banner, use the
no banner exec
command.
Parameters
c Enter the keywords
banner exec
, then enter a character delineator, represented here
by the letter c . Press ENTER .
line Enter a text string for your banner message ending the message with your delineator. In
the following example, the delineator is a percent character (%); the banner message is
“testing, testing”.
Defaults No banner is displayed.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
4
Control and Monitoring 85