Dell S6100, Руководство по настройке

Страница: 1170 / 1743

Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Added support for Multi-Process OSPF.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.1 Introduced on the E-Series.
max-metric router-lsa
Configure the maximum cost of 65535 on a new router so that it functions as a stub router in the network and OSPF traffic destined to
other networks is not forwarded on a path through the router.
C-Series, E-Series, Z-Series, S4810
Syntax max-metric router-lsa [ on-startup { announce-time | wait-for-bgp [ wait-time ]}]
To remove the maximum metric assignment from an OSPF router and send LSAs with the currently configured
cost, enter no max-metric router-lsa [ on-startup { announce-time | wait-for-bgp [ wait-time ]}].
Parameters
on-startup
announce-time
Enter the time (in seconds) following boot-up during which the maximum cost (65535)
for transmitting OSPF traffic on router interfaces is announced in LSAs and the router
functions as a stub router.
Range: 5 to 86400 seconds.
on-startup wait-
for-bgp
[ wait-time ]
Enable the router to announce the maximum metric in OSPF LSAs until the BGP routing
table converges with updated routes. Default: 600 seconds.
You can also specify the time (in seconds) that the router waits for the BGP routing table
to converge before it stops advertising the maximum cost in LSAs and advertises the
router’s currently configured OSPF cost. Range: 5 to 86400 seconds.
Defaults Not Configured.
Command Modes
ROUTER OSPF
1170 Open Shortest Path First (OSPFv2 and OSPFv3)