Dell S6100, Руководство по настройке

Страница: 627 / 1743

Version Description
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on C-Series, E-Series, and S-Series
Usage Information
• Join Timer —
Join
messages announce the willingness to register some attributes with other participants. For
reliability, each GARP application entity sends a
Join
message twice and uses a join timer to set the sending
interval.
• Leave Timer —
Leave
announces the willingness to de-register with other participants. Together with
Join
,
Leave
messages help GARP participants complete attribute reregistration and de-registration. The leave timer
starts after receipt of a leave message sent for de-registering some attribute information. If a
Join
message is
not received before the
Leave
time expires, the GARP application entity removes the attribute information as
requested.
• Leave All Timer — The
Leave All
timer starts when a GARP application entity starts. When this timer
expires, the entity sends a Leave-all message so that other entities can reregister their attribute
information. Then the
Leave-all
time begins again.
Related Commands
• show garp timers — display the current GARP times.
gvrp enable
Enable GVRP on physical interfaces and LAGs.
Syntax gvrp enable
To disable GVRP on the interface, use the
no gvrp enable
command.
Defaults Disabled.
Command Modes CONFIGURATION-INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
GARP VLAN Registration (GVRP) 627