Dell S6100, Руководство по настройке

Страница: 840 / 1743

Version Description
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
clns host
Define a name-to-network service mapping point (NSAP) that you use with commands that require NSAPs and system IDs.
Syntax clns host name nsap
Parameters
name Enter an alphanumeric string to identify the name-to-NSAP mapping.
nsap Enter a specific NSAP address that is associated with the name parameter.
Defaults Not configured.
Command Modes ROUTER ISIS
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
Usage Information To configure a shortcut name that you can use instead of entering a long string of numbers associated with an
NSAP address, use this command.
Related Commands
• hostname dynamic — enable dynamic learning of host names from routers in the domain and allows the
routers to advertise the host names in LSPs.
840 Intermediate System to Intermediate System (IS-IS)