Dell S6100, Руководство по настройке

Страница: 62 / 1743

Version Description
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage Information
Dell Networking OS supports a maximum of 100 files at the root directory level on both the internal and external
flash.
When copying a file to a remote location (for example, using Secure Copy [SCP]), enter only the keywords and Dell
Networking OS prompts you for the rest of the information. For example, when using SCP, you can enter
copy
running-config scp:
where
running-config
is the source and the target is specified in the ensuing
prompts. Dell Networking OS prompts you to enter any required information for the named destination — remote
destination, destination filename, user ID, password, and so forth.
When you use the
copy running-config startup-config
command to copy the running configuration to
the startup configuration file, Dell Networking OS creates a backup file on the internal flash of the startup
configuration.
When you load the startup configuration or a configuration file from a network server such as TFTP to the running
configuration, the configuration is added to the running configuration. This does not replace the existing running
configuration. Commands in the configuration file has precedence over commands in the running configuration.
Dell Networking OS supports copying the running-configuration to a TFTP server, an FTP server, or a remote NFS
file system. For example:
•
copy running-config tftp:
•
copy running-config ftp:
•
copy running-config nfsmount://<mount-point>/filepath
You can compress the running configuration by grouping all the VLANs and the physical interfaces with the same
property. You can store the operating configuration to the startup config in Compressed mode and perform an
image downgrade without any configuration loss.
Example
Dell#copy running-config scp:
Address or name of remote host []: 192.168.1.1
Port number of the server [22]: 22
Destination file name [startup-config]:
User name to login remote host: username
Password to login remote host:
!
4080 bytes successfully copied
Dell#
In this
copy scp: flash:
example, specifying
SCP
in the first position indicates that you need to specify the
target in the ensuing prompts. Entering
flash:
in the second position indicates that the target is the internal
flash. The source is on a secure server running secure shell (SSH), so you are prompted for the user datagram
protocol (UDP) port of the SSH server on the remote host.
Example
Dell# copy running-config nfsmount://<mount-point>/filepath
Destination file name [test.txt]:
User name to login remote host: usrname
Password to login remote host:
Dell#
Example
Dell# copy scp: flash:
Address or name of remote host []: 10.11.199.134
Port number of the server [22]: 99
Source file name []: test.cfg
62 File Management