Dell S6100, Руководство по настройке

Страница: 668 / 1743

Parameters
desc_text Enter a text string up to 240 characters long.
Defaults None
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
7.4.1.0 Modified for E-Series: Revised from 78 to 240 characters.
Usage Information
Important Points to Remember:
• To use special characters as a part of the description string, you must enclose the whole string in double
quotes.
• Spaces between characters are not preserved after entering this command unless you enclose the entire
description in quotation marks (
“ desc_text ”
).
• Entering a text string after the
description
command overwrites any previous text string that you
previously configured as the description.
• The shutdown and description commands are the only commands that you can configure on an interface
that is a member of a port-channel.
• Use the
show interfaces description
command to display descriptions configured for each interface.
default interface
Reset a physical interface to its factory default settings.
Syntax default interface interface-type slot/port - range
Parameters
interface-type slot/
port
[ /subport ]
Enter the interface type and slot/port [/subport] information:
668 Interfaces