Dell S6100, Руководство по настройке

Страница: 503 / 1743

NOTE: In addition to the specified pause-threshold value, pause frames are
sent only when the buffer usage exceeds some percentage of the shared
buffer.
threshold-value Buffer limit at which the port sends the pause to peer in KB. Enter a number in the range
of 0 to 9. The default is as follows:
• 10G – 9
• 25G – 9
• 40G – 9
• 50G – 9
• 100G – 9
peak-headroom Maximum buffer that a priority can use from the shared headroom pool buffer.
headroom-value Enter a number in the range 0 to 9. The defaults are as follows:
• 10G - 36 KB
• 25G - 76 KB
• 40G - 76 KB
• 50G - 143 KB
• 100G - 143 KB
resume-offset Buffer offset limit for stopping the transmission of pause frames.
threshold-value Buffer offset limit at which the port resumes the peer in KB. Enter a number in the range
of 0 to 512. The default is 9 KB.
shared-threshold-
weight Buffer shared threshold weight
size Weightage of the priorities on the shared buffer size in the system. Enter a number in the
range of 0 to 11. The default shared threshold weight is 11.
Command Modes DCB-BUFFER-THRESHOLD mode
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.11(2.0P0) Default values of buffer threshold profile parameters are changed for the Z9100-ON and
S6100-ON.
9.10(0.0) Introduced on the S6100.
9.8(1.0) Introduced on the Z9100–ON.
9.7(0.0) Introduced on the S6000-ON.
9.3(0.0) Introduced on the S4810, S4820T, and S6000 platforms.
Usage Information
For each priority, you can specify the shared buffer threshold limit, the ingress buffer size, buffer limit for pausing
the acceptance of packets, and the buffer offset limit for resuming the acceptance of received packets. When PFC
detects congestion on a queue for a specified priority, it sends a pause frame for the 802.1p priority traffic to the
transmitting device.
Data Center Bridging (DCB) 503