Dell S6100, Руководство по настройке

Страница: 883 / 1743

route-map map-
name
(OPTIONAL) If you do not enter the route-map argument, all routes are redistributed. If a
map-name value is not specified, no routes are imported.
Defaults
• metric metric-value = 0
• metric-type= internal; level-2
Command Modes
• ROUTER ISIS ( for IPv4 )
• CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 ( for IPv6 )
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.12.0 Introduced on the S4810.
7.5.1.0 Added support for IPv6 ISIS.
6.3.1.0 Introduced.
Usage Information
To redistribute a default route (0.0.0.0/0), configure the
default-information originate
command.
Changing or disabling a keyword in this command does not affect the state of the other command keywords.
When an LSP with an internal metric is received, the Dell Networking OS considers the route cost while
considering the advertised cost to reach the destination.
Redistributed routing information is filtered with the
distribute-list out
command to ensure that the
routes are properly passed to the receiving routing protocol.
How a metric value assigned to a redistributed route is advertised depends on how on the configuration of the
metric-style
command. If the
metric-style
command is set for Narrow or Transition mode and the metric
value in the
redistribute
command is set to a number higher than 63, the metric value advertised in LSPs is
63. If the
metric-style
command is set for Wide mode, the metric value in the
redistribute
command is
advertised.
Related Commands
• default-information originate — generate a default route for the IS-IS domain.
Intermediate System to Intermediate System (IS-IS) 883