Force10 Resilient Ring Protocol (FRRP)
FRRP is a proprietary protocol for that offers fast convergence in a Layer 2 network without having to run the spanning tree protocol
(STP). The resilient ring protocol is an efficient protocol that transmits a high-speed token across a ring to verify the link status. All the
intelligence is contained in the master node with practically no intelligence required of the transit mode.
Important Points to Remember
•
FRRP is media- and speed-independent.
•
FRRP is a Dell Networking proprietary protocol that does not interoperate with any other vendor.
•
Spanning Tree must be disabled on both primary and secondary interfaces before Resilient Ring protocol is enabled.
•
A VLAN configured as the control VLAN for a ring cannot be configured as a control or member VLAN for any other ring.
•
Member VLANs across multiple rings are not supported in Master nodes.
•
If multiple rings share one or more member VLANs, they cannot share any links between them.
•
Each ring can have only one Master node; all others are Transit nodes.
Topics:
•
•
•
•
•
•
•
•
•
•
clear frrp
Clear the FRRP statistics counters.
Syntax
clear frrp [
ring-id
]
Parameters
ring-id
(Optional) Enter the ring identification number. The range is from 1 to 255.
Defaults
None
17
610
Force10 Resilient Ring Protocol (FRRP)
Содержание S6100
Страница 1: ...Dell Command Line Reference Guide for the S6100 ON System 9 11 2 0P1 ...
Страница 474: ...protocol list ttl0 ttl1 Dell 474 Control Plane Policing CoPP ...
Страница 979: ... show lldp neighbors display the LLDP neighbors Link Layer Discovery Protocol LLDP 979 ...
Страница 1627: ... uplink state group creates an uplink state group and enables the tracking of upstream links Uplink Failure Detection UFD 1627 ...