Dell S6100, Руководство по настройке

Страница: 612 / 1743

debug frrp
Clear the FRRP statistics counters.
Syntax debug frrp {event | packet | detail} [ ring-id ] [count number ]
To disable debugging, use the
no debug frrp {event | packet | detail} { ring-id }
[countnumber] command.
Parameters
event Enter the keyword
event
to display debug information related to ring protocol transitions.
packet Enter the keyword
packet
to display brief debug information related to control packets.
detail Enter the keyword
detail
to display detailed debug information related to the entire ring
protocol packets.
ring-id (Optional) Enter the ring identification number. The range is from 1 to 255.
count number Enter the keyword
count
then the number of debug outputs. The range is from 1 to
65534.
Defaults Disabled.
Command Modes CONFIGURATION (conf-frrp)
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the C-Series.
7.4.1.0 Introduced.
Usage Information Because the resilient ring protocol can potentially transmit 20 packets per interface, restrict debug information.
612 Force10 Resilient Ring Protocol (FRRP)