©2013 Marine Acquisition (US) Inc.
These Instructions describe how to replace the toggle switch in the PROTRIM® Single or Dual Bezel Switch
Performance Tilt and Sea Star® Hydraulic Helms.
Step 1. Remove the plastic cover of the switch
with boot (counterclockwise). Then remove the
face nut, and then the plastic cover (see parts
list diagram, Figure 1).
Step 2. Remove the hex nut holding the switch
in place. Remove switch. Disconnect wires and
reattach to new switch one at a time (red to
center terminal, green to top and blue to
bottom terminal).
Step 3. Mount switch with hex nut.
Step 4. Reinstall the cover, face nut, and
operation lever with boot on the switch
assembly.
Manual # IS-CA76431-1
