Dell S6100, Руководство по настройке

Страница: 667 / 1743

Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
7.4.1.0 Introduced on the E-Series.
Usage Information With each flap, Dell Networking OS penalizes the interface by assigning a penalty (1024) that decays exponentially
depending on the configured half-life. After the accumulated penalty exceeds the suppress threshold value, the
interface moves to the Error-Disabled state. This interface state is deemed as “down” by all static/dynamic Layer 2
and Layer 3 protocols. The penalty is exponentially decayed based on the half-life timer. After the penalty decays
below the reuse threshold, the interface enables. The configured parameters are as follows:
•
suppress-threshold
should be greater than
reuse-threshold
•
max-suppress-time
should be at least 4 times
half-life
NOTE: You cannot apply dampening on an interface that is monitoring traffic for other interfaces.
Example
Dell(conf-if-te-1/1/6/1)# dampening 20 800 4500 120
Dell(conf-if-te-1/1/6/1)#
Related Commands
• clear dampening — clear the dampening counters on all the interfaces or just the specified interface.
• show interfaces dampening — display interface dampening information.
description
Assign a descriptive text string to the interface.
Syntax description desc_text
To delete a description, use the
no description
command.
Interfaces 667