Dell S6100, Руководство по настройке

Страница: 858 / 1743

graceful-restart t3
Configure the overall wait time before graceful restart completes.
Syntax graceful-restart t3 {adjacency | manual} seconds
To return to the default, use the
no graceful-restart t3
command.
Parameters
adjacency Enter the keyword
adjacency
so that the restarting router receives the remaining time
value from its peer and adjusts its T3 value so if you have configured this option.
manual Enter the keyword manual to specify a time value that the restarting router uses. The
range is from 50 to 120 seconds. The default is 30 seconds .
Defaults manual, 30 seconds
Command Modes ROUTER ISIS
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.3.1.0 Introduced on the E-Series.
Usage Information
The running router sets the remaining time value to the current adjacency hold time. You can override this setting
by implementing this command.
Override the default restart-wait time by entering the no graceful-restart restart-wait command.
When you disable
restart-wait
, the current adjacency hold time is used.
Set the t3 timer to
adjacency
on the restarting router when implementing this command. The restarting router
gets the remaining time value from its peer and adjusts its T3 value so only when you have configured
graceful-
restart t3 adjacency
.
Related Commands
• graceful-restart restart-wait — enable the graceful restart maximum wait time before a restarting peer comes
up.
858 Intermediate System to Intermediate System (IS-IS)