Dell S6100 Скачать руководство пользователя страница 342

Страница: 342 / 1743

Version

Description

9.8(0.0P2)

Introduced on the S3048-ON.

9.7(0.0)

Introduced on the S6000–ON.

9.2(1.0)

Introduced on the Z9500.

9.0.2.0

Introduced on the S6000.

8.3.19.0

Introduced on the S4820T.

8.3.11.1

Introduced on the Z9000.

8.3.7.0

Introduced on the S4810.

8.2.1.0

Introduced command.

7.7.1.0

Introduced on the C-Series.

Usage Information

Any update without a MED attribute is the least preferred route.

If you enable this command, use the

clear ip bgp *

command to recompute the best path.

bgp asnotation

Allows you to implement a method for AS number representation in the command line interface (CLI).

Syntax

bgp asnotation [

asplain

asdot+

asdot

]

To disable a dot or dot+ representation and return to ASPLAIN, enter the

no bgp asnotation

command.

Defaults

asplain

Command Modes

ROUTER BGP

Command History

This guide is platform-specific. For command information about other platforms, see the relevant

Dell Networking

OS Command Line Reference Guide

Version

Description

9.8(0.0P5)

Introduced on the S4048-ON.

9.8(0.0P2)

Introduced on the S3048-ON.

9.7(0.0)

Introduced on the S6000–ON.

9.2(1.0)

Introduced on the Z9500.

9.0.2.0

Introduced on the S6000.

8.3.19.0

Introduced on the S4820T.

8.3.11.1

Introduced on the Z9000.

8.3.7.0

Introduced on the S4810.

8.3.1.0

Introduced the dynamic application of AS notation changes.

8.2.1.0

Introduced.

342

Border Gateway Protocol

Содержание S6100
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание S6100

Отзывы:

Похожие инструкции для S6100

Бренды по названию

Популярные бренды

Dell S6100, Руководство по настройке

Результаты поиска

Содержание S6100

Отзывы:

Похожие инструкции для S6100

Бренды по названию

Популярные бренды