portpipe-number
Enter the port set number.
Defaults
None
Command Modes
EXEC Privilege.
Command History
This guide is platform-specific. For command information about other platforms, see the relevant
Dell Networking OS Command
Line Reference Guide
.
Version
Description
9.10(0.0)
Introduced on the S6000, S6000–ON, S6100–ON, Z9100–ON.
Usage Information
The
show storm-control pfc status
command is used to view the status of the PFC storm on the specified stack unit
and the port set.
Example
Dell#show storm-control pfc status stack-unit 1 port-set 0
-------------------------------------------------------------------------------------------------------
Interface Priority State Duration in discard state(in ms) Pkts Dropped(Ingress) Pkts Dropped(Egress) Pkts
Dropped(Ingress,Cumulative) Pkts
Dropped(Egress,Cumulative)-------------------------------------------------------------------------------------------------------
Fo 1/32/1 4 Drop 1194740 2389 135759218588
2389 135759218588
Fo 1/1/1 4 Normal 0 0 0
0 0
Fo 1/17/1 4 Normal 0 0 0
0 0
clear storm-control pfc drop-counters
Clears all the ingress & egress drop counters and time since discard. The counters are reset and started afresh from 0.
Syntax
clear storm-control pfc drop-counters stack-unit {
unit-number
} port-set
{
portpipe-number
}
Parameters
unit-number
Enter the stack unit number.
portpipe-number
Enter the port set number.
Defaults
None
Command Modes
EXEC Privilege.
Command History
This guide is platform-specific. For command information about other platforms, see the relevant
Dell Networking
OS Command Line Reference Guide
.
Version
Description
9.11(0.0)
Introduced on the S6000, S6000–ON, S6100–ON, Z9100–ON.
Usage Information
The
clear storm-control pfc drop-counters
command is used to clears all the ingress & egress drop
counters and time since discard on the specified stack unit and port set.
Related Commands
— view the status of the PFC storm on a stack unit with a specific port set.
1552
Storm Control
Содержание S6100
Страница 1: ...Dell Command Line Reference Guide for the S6100 ON System 9 11 2 0P1 ...
Страница 474: ...protocol list ttl0 ttl1 Dell 474 Control Plane Policing CoPP ...
Страница 979: ... show lldp neighbors display the LLDP neighbors Link Layer Discovery Protocol LLDP 979 ...
Страница 1627: ... uplink state group creates an uplink state group and enables the tracking of upstream links Uplink Failure Detection UFD 1627 ...