Dell S6100, Руководство по настройке

Страница: 876 / 1743

Version Description
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
7.5.1.0 Added support for LSP Throttling Enhancement.
Usage Information
The refresh interval determines the rate at which route topology information is transmitted preventing the
information from becoming obsolete.
The refresh interval must be less than the LSP lifetime specified with the
max-lsp-lifetime
command. A low
value reduces the amount of time that undetected link state database corruption can persist at the cost of
increased link utilization. A higher value reduces the link utilization the flooding of refreshed packets causes.
Related Commands
• max-lsp-lifetime — set the maximum interval that LSPs persist without being refreshed.
max-area-addresses
Configure manual area addresses.
Syntax max-area-addresses number
To return to the default values, use the
no max-area-addresses
command.
Parameters
number Set the maximum number of manual area addresses. The range is from 3 to 6. The default
is
3 .
Defaults 3 addresses
Command Modes ROUTER ISIS
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
876 Intermediate System to Intermediate System (IS-IS)