Dell S6100, Руководство по настройке

Страница: 465 / 1743

9.11.0.0 Introduced on the S6000, S6000–ON, Z9100–ON, and S6100–ON.
Example
Dell(conf)#copp-profile COPP
Dell(conf-copp-profile)#show config
!
copp-profile COPP
Dell(conf-copp-profile)#
cpu-queue
Configures queue parameters.
Syntax cpu-queue queue-number {protocol-group group-name [qos-policy policy-name ] |
qos-policy policy-name }
Use the
no cpu-queue queue-number
command to remove the queue parameter configuration.
Command Modes COPP-PROFILE
Parameters
queue-number Enter the queue number that you want to configure. The range is from 0 to 11. A queue
can be mapped to a protocol-group or a qos-policy or both. Protocol groups cannot be
configured for queue numbers 0 and 4. Only qos-policy can be mapped to these two
queues.
protocol-group
group-name
Enter the keyword
protocol-group
followed by the name of the protocol group.
qos-policy policy-
name
Enter the keyword
qos-policy
followed by the name of the QoS policy. The Rateshape
parameters and queue-length are defined in the QoS policy.
Command History
Version Description
9.11.0.0 Introduced on the S6000, S6000–ON, Z9100–ON, and S6100–ON.
Usage Information
The protocols which are not mapped to the cpu queues will be mapped to Queue 0. The internal protocols like IPC,
VLT etc will be mapped to Queue 4.
Example
Dell(conf)#copp-profile COPP
Dell(conf-copp-profile)#cpu-queue 1 protocol-group PG1 qos-policy QP1
Dell(conf-copp-profile)#cpu-queue 2 protocol-group PG2
Dell(conf-copp-profile)#cpu-queue 3 qos-policy QP3
Dell(conf-copp-profile)#show config
!
copp-profile COPP
cpu-queue 1 protocol-group PG1 qos-policy QP1
cpu-queue 2 protocol-group PG2
cpu-queue 3 qos-policy QP3
Dell(conf-copp-profile)#
copp-policy
Creates a control plane policing (CoPP) policy.
Syntax copp-policy profile-name
Control Plane Policing (CoPP) 465