isis priority
Set the priority of the designated router you select.
Syntax
isis priority
value
[level-1 | level-2]
To return to the default values, use the
no isis priority [
value
] [level-1 | level-2]
command.
Parameters
value
This value sets the router priority. The higher the value, the higher the priority. The range
is from 0 to 127. The default is
64
.
level-1
(OPTIONAL) Specify the priority for Level 1. This setting is the default.
level-2
(OPTIONAL) Specify the priority for Level 2.
Defaults
value =
64
;
level-1
(if not otherwise specified).
Command Modes
INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant
Dell Networking
OS Command Line Reference Guide
.
Version
Description
9.10(0.0)
Introduced on the S6100–ON.
9.8(1.0)
Introduced on the Z9100–ON.
9.8(0.0P5)
Introduced on the S4048-ON.
9.8(0.0P2)
Introduced on the S3048-ON.
9.7(0.0)
Introduced on the S6000-ON.
9.5(0.1)
Introduced on the Z9500.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.12.0
Introduced on the S4810.
8.3.11.1
Introduced on the Z9000.
Usage Information
You can configure priorities independently for Level 1 and Level 2. Priorities determine which router on a LAN is the
designated router. Priorities are advertised within hellos. The router with the highest priority becomes the
designated intermediate system (DIS).
NOTE:
Routers with a priority of 0 cannot be a designated router.
Setting the priority to 0 lowers the chance of this system becoming the DIS, but does not prevent it. If all the
routers have priority 0, one with highest MAC address becomes DIS even though its priority is 0.
Intermediate System to Intermediate System (IS-IS)
871
Содержание S6100
Страница 1: ...Dell Command Line Reference Guide for the S6100 ON System 9 11 2 0P1 ...
Страница 474: ...protocol list ttl0 ttl1 Dell 474 Control Plane Policing CoPP ...
Страница 979: ... show lldp neighbors display the LLDP neighbors Link Layer Discovery Protocol LLDP 979 ...
Страница 1627: ... uplink state group creates an uplink state group and enables the tracking of upstream links Uplink Failure Detection UFD 1627 ...