Dell S6100, Руководство по настройке

Страница: 1490 / 1743

Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on S-Series Stacking.
8.1.1.0 Introduced on the E-Series.
7.7.1.0 Introduced on the S-Series.
7.6.1.0 Introduced on the C-Series.
7.4.1.0 Introduced on the E-Series.
Usage Information Sample-rate is the average number of packets skipped before the sample is taken. This command changes the
global default sampling rate. You can configure an interface to use a different sampling rate than the global
sampling rate. If the value entered is not a correct power of 2, the command generates an error message with the
previous and next power of 2 value. Select one of these two packet numbers and re-enter the command.
Related Commands
• sflow sample-rate (Interface) — changes the interface sampling rate.
sflow sample-rate (Interface)
Change the interface default sampling rate.
Syntax sflow sample-rate value
To return to the default sampling rate, use the
no sflow sample-rate
command.
Parameters
value Enter the sampling rate value. For the C-Series and S-Series, the range is from 256 to
8388608 packets. Enter values in powers of 2 only; for example, 4096, 8192, 16384, etc.
The default is
32768 packets.
Defaults The Global default sampling.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100-ON.
1490 sFlow