Dell S6100, Руководство по настройке

Страница: 875 / 1743

Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
7.5.1.0 Added support for LSP Throttling Enhancement.
Usage Information
The link MTU and the LSP MTU size must be the same.
Because each device can generate a maximum of 255 LSPs, consider carefully whether you use the
lsp-mtu
command.
lsp-refresh-interval
Set the link state PDU (LSP) refresh interval. LSPs must be refreshed before they expire. When the LSPs are not refreshed after a refresh
interval, they are kept in a database until their
max-lsp-lifetime
reaches zero and then LSPs is purged.
Syntax lsp-refresh-interval seconds
To restore the default refresh interval, use the no lsp-refresh-interval command.
Parameters
seconds The LSP refresh interval, in seconds. This value must be 300 seconds less than the value
specified in the
max-lsp-lifetime
command. The range is from 1 to 65535 seconds.
The default is 900 .
Defaults 900 seconds
Command Modes ROUTER ISIS
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
Intermediate System to Intermediate System (IS-IS) 875