Dell S6100, Руководство по настройке

Страница: 1261 / 1743

Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Added the
kbps
option on the C-Series, E-Series, and S-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.1 Introduced on the E-Series.
Usage Information
NOTE: Per Port rate police is supported for Layer 2 tagged and untagged switched traffic and for Layer
3 traffic. Per VLAN rate police is supported on only tagged ports with Layer 2 switched traffic.
S-Series
On one interface, you can configure the
rate police
command for a VLAN or you can configure the
rate
police
command for an interface. For each physical interface, you can configure three
rate police
commands specifying different VLANS.
rate-shape
Shape the traffic output on the selected interface.
Syntax rate shape [kbps] rate [ burst-KB ]
Parameters
kbps Enter the keyword
kbps
to specify the rate limit in Kilobits per second (Kbps). Enter the
value in multiples of 64. The range is from 0 to 100000000. The default granularity is
Megabits per second (Mbps).
rate The range is from 10 to 40000.
burst-KB (OPTIONAL) Enter the burst size in KB. The range is from 0 to 10000. The default is 50 .
Defaults Granularity for rate is Mbps unless you use the
kbps
option.
Command Modes INTERFACE
Quality of Service (QoS) 1261