Dell S6100, Руководство по настройке

Страница: 257 / 1743

permit Enter the keyword
permit
to configure a filter to forward packets meeting this
condition.
any (OPTIONAL) Enter the keyword
any
to match any packets.
ip-prefix /nn (OPTIONAL) Specify an IP prefix in the network/length format. For example, 35.0.0.0/8
means match the first 8 bits of address 35.0.0.0.
ge min-prefix-
length
(OPTIONAL) Enter the keyword
ge
and then enter the minimum prefix length, which is a
number from zero (0) to 32.
le max-prefix-length (OPTIONAL) Enter the keyword
le
and then enter the maximum prefix length, which is a
number from zero (0) to 32.
bitmask number Enter the keyword
bitmask
then enter a bit mask number in dotted decimal format.
Defaults Not configured.
Command Modes PREFIX-LIST
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.3.1.0 Added the
bit mask
option.
Usage Information
If you do not use the
ge
or
le
options, only packets with an exact match to the prefix are filtered.
show config
Display the current PREFIX-LIST configurations.
Syntax show config
Command Modes PREFIX-LIST
Access Control Lists (ACL) 257