Dell S6100, Руководство по настройке

Страница: 1508 / 1743

Version Description
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.4.1.0 Added support for VRRP traps.
7.6.1.0 Added support for STP and xSTP notification types. Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series legacy
command
Usage Information
To configure the router to send SNMP notifications, enter at least
one snmp-server host
command. If you
enter the command with no keywords, all trap types are enabled for the host. If you do not enter an
snmp-
server host
command, no notifications are sent.
In order to enable multiple hosts, issue a separate
snmp-server host
command for each host. You can specify
multiple notification types in the command for each host.
When multiple snmp-server host commands are given for the same host and type of notification (trap or
inform), each succeeding command overwrites the previous command. Only the last
snmp-server host
command will be in effect. For example, if you enter an
snmp-server host inform
command for a host and
then enter another
snmp-server host inform
command for the same host, the second command replaces
the first command.
The
snmp-server host
command is used with the
snmp-server enable
command. Use the
snmp-
server enable
command to specify which SNMP notifications are sent globally. For a host to receive most
notifications, at least one
snmp-server enable
command and the
snmp-server host
command for that
host must be enabled.
NOTE: For v1 / v2c trap configuration, if the community-string is not defined using the
snmp-server
community
command prior to using this command, the default form of the
snmp-server
community
command automatically is configured with the community-name the same as specified in
the
snmp-server host
command.
Configuring Informs
To send an inform, use the following steps:
1 Configure a remote engine ID.
2 Configure a remote user.
3 Configure a group for this user with access rights.
4 Enable traps.
5 Configure a host to receive informs.
Related Commands
• snmp-server enable traps — enables SNMP traps.
• snmp-server community — configures a new community SNMPv1 or SNMPv2c.
1508 Simple Network Management Protocol (SNMP) and Syslog