Dell S6100, Руководство по настройке

Страница: 1385 / 1743

To delete access to a level and command, use the
no privilege mode level level command
command.
Parameters
mode Enter one of the following keywords as the mode for which you are controlling access:
• configure for CONFIGURATION mode
•
exec
for EXEC mode
•
interface
for INTERFACE modes
•
line
for LINE mode
•
route-map
for ROUTE-MAP mode
•
router
for ROUTER OSPF, ROUTER RIP, ROUTER ISIS and ROUTER BGP modes
level level Enter the keyword
level
then a number for the access level. The range is from 0 to 15.
Level 1 is EXEC mode and Level 15 allows access to all CLI modes and commands.
reset Enter the keyword
reset
to return the security level to the default setting.
command Enter the command’s keywords to assign the command to a certain access level. You can
enter one or all of the keywords.
Defaults Not configured.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
Usage Information To define a password for the level to which you are assigning privilege or access, use the
enable password
command.
Security 1385