Dell S6100, Руководство по настройке

Страница: 1273 / 1743

Version Description
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series. Added support for the DSCP Marking option.
6.1.1.1 Introduced on the E-Series.
Usage Information
To access this command, enter the
class-map
command. After the class map is identified, you can configure the
match criteria.
The
match ip precedence
command and the
match ip dscp
command are mutually exclusive.
Up to eight precedence values can be matched in one match statement. For example, to indicate the IP
precedence values 0 1 2 3, enter either the
match ip precedence 0-3
or
match ip precedence
0,1,2,3
command.
NOTE: Only one of the IP precedence values must be a successful match criterion, not all of the
specified IP precedence values must match.
Related Commands
• class-map — identifies the class map.
match mac access-group
Configure a match criterion for a class map, based on the contents of the designated MAC ACL.
Syntax match mac access-group { mac-acl-name }
Parameters
mac-acl-name Enter a MAC ACL name. Its contents is used as the match criteria in the class map.
Defaults none
Command Modes CLASS-MAP
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
Quality of Service (QoS) 1273