Version
Description
7.8.1.0
Introduced on the S-Series.
7.7.1.0
Introduced on the C-Series.
Usage Information
Peering sessions are reset when you change the router ID of a BGP router.
This command automatically restarts the BGP instance for the configuration to take effect.
clear ip bgp
Reset BGP sessions. The soft parameter (BGP Soft Reconfiguration) clears the policies without resetting the TCP connection.
Syntax
clear ip bgp [vrf
vrf-name
] [* |
<1–4294967295>
|
<0.1–65535.65535>
|
A.B.C.D
{soft {in | out}} |
X:X:X:X::X
{soft {in | out}} | dampening | flap-statistics
| ipv4 | ipv6 | peer-group]
Parameters
*
Enter an asterisk ( * ) to reset all BGP sessions.
<1-4294967295>
Enter <1-4294967295> to clear peers with the AS number.
<0.1-65535.65535>
Enter <0.1-65535.65535> to clear peers with the AS number in dot format.
A.B.C.D
Enter the BGP neighbor address in the A.B.C.D format to clear.
X:X:X:X::X
Enter the BGP neighbor address in the X:X:X:X::X format to clear.
soft
(OPTIONAL) Enter the keyword
soft
to configure and activate policies without resetting
the BGP TCP session, that is, BGP Soft Reconfiguration.
NOTE:
If you enter the
clear ip bgp ip-address soft
command, both
inbound and outbound policies are reset.
in
(OPTIONAL) Enter the keyword
in
to activate only inbound policies.
out
(OPTIONAL) Enter the keyword
out
to activate only outbound policies.
NOTE:
You must execute the
clear ip bgp soft out
command when
ever there is a change in the local policy. If you do not run this command after
a local policy change, then these policy changes are not reflected in the
responses to the peer’s route refresh messages.
dampening
Enter the keyword
dampening
to clear the flap dampening information.
flap-statistics
Enter the keywords
flap-statistics
to clear the flap statistics information.
ipv4
Enter the ipv4 address family to clear.
ipv6
Enter the ipv6 address family to clear.
peer-group
Enter the peer-group to clear all members of the peer-group.
Command Modes
EXEC Privilege
362
Border Gateway Protocol
Содержание S6100
Страница 1: ...Dell Command Line Reference Guide for the S6100 ON System 9 11 2 0P1 ...
Страница 474: ...protocol list ttl0 ttl1 Dell 474 Control Plane Policing CoPP ...
Страница 979: ... show lldp neighbors display the LLDP neighbors Link Layer Discovery Protocol LLDP 979 ...
Страница 1627: ... uplink state group creates an uplink state group and enables the tracking of upstream links Uplink Failure Detection UFD 1627 ...