Dell S6100, Руководство по настройке

Страница: 111 / 1743

Version Description
9.7(0.0) Introduced on the S6000-ON.
9.5(0.0) Introduced on the Z9500.
9.4.(0.0) Introduced on the S-Series and Z9000.
Usage Information Use this command to make the TFTP clients VRF aware. The VRF name that you specify is used by the TFTP
client to reach the TFTP server. If no VRF is specified, then the default VRF is used.
Related Commands
• ftp-server topdir — sets the directory to be used for incoming FTP connections.
• ftp-server username — sets a username and password for incoming FTP connections.
line
Enable and configure console and virtual terminal lines to the system. This command accesses LINE mode, where you can set the access
conditions for the designated line.
Syntax line {console 0 | vty number [ end-number ]}
Parameters
console 0 Enter the keyword
console 0
to configure the console port. The console option is
<0-0>
.
vty number Enter the keyword
vty
then a number from 0 to 9 to configure a virtual terminal line for
remote sessions. The system supports 10 remote sessions.
end-number (OPTIONAL) Enter a number from 1 to 9 as the last virtual terminal line to configure. You
can configure multiple lines at one time.
Defaults Not configured
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series.
Control and Monitoring 111