vrf
vrf-name
(Optional) E-Series only: You can configure a VPN routing and forwarding (VRF) instance
to specify the virtual routing table to which the tracked route belongs.
Defaults
None
Command Modes
CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant
Dell Networking
OS Command Line Reference Guide
.
Version
Description
9.10(0.0)
Introduced on the S6100-ON.
9.8(1.0)
Introduced on the Z9100-ON.
9.8(0.0P5)
Introduced on the S4048-ON.
9.8(0.0P2)
Introduced on the S3048-ON.
9.7(0.0)
Introduced on the S6000-ON.
8.3.12.0
Introduced on the S4810.
8.4.1.0
Introduced.
Usage Information
Use this command to create an object that tracks the reachability of an IPv4 route. In order for a route’s
reachability to be tracked, the route must appear as an entry in the routing table.
A tracked IPv4 route is considered to match an entry in the routing table only if the exact IPv4 address and prefix
length match a table entry. For example, when configured as a tracked route, 10.0.0.0/24 does not match the
routing table entry 10.0.0.0/8. If no route-table entry has the exact IPv4 address and prefix length, the status of the
tracked route is considered to be DOWN.
When you configure IPv4 route reachability as a tracked object, the UP/DOWN state of the tracked route is also
determined by the entry of the next-hop address in the ARP cache. A tracked route is considered to be reachable
if there is an ARP cache entry for the route's next-hop address.
If the next-hop address in the ARP cache ages out for a route tracked for its reachability, an attempt is made to
regenerate the ARP cache entry to if the next-hop address appears before considering the route DOWN.
Related Commands
•
– display information about tracked objects, including configuration, current state, and clients which
track the object.
•
track ip route metric threshold
– configure object tracking on the threshold of an IPv4 route metric.
track resolution ip route
Configure the protocol-specific resolution value used to scale an IPv4 route metric.
Syntax
track resolution ip route {isis
resolution-value
| ospf
resolution-value
}
To return to the default setting, use the
no track
object-id
command.
Parameters
object-id
Enter the ID number of the tracked object. The range is 1 to 500.
Object Tracking
1057
Содержание S6100
Страница 1: ...Dell Command Line Reference Guide for the S6100 ON System 9 11 2 0P1 ...
Страница 474: ...protocol list ttl0 ttl1 Dell 474 Control Plane Policing CoPP ...
Страница 979: ... show lldp neighbors display the LLDP neighbors Link Layer Discovery Protocol LLDP 979 ...
Страница 1627: ... uplink state group creates an uplink state group and enables the tracking of upstream links Uplink Failure Detection UFD 1627 ...