Dell S6100 Скачать руководство пользователя страница 190

Страница: 190 / 1743

cam_count

List the count of the CAM rules for this ACL.

interface

interface

Enter the keyword

interface

then the one of the following keywords and the interface

information:

•

For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet

then

the stack/slot/port/subport information.

•

For a 25-Gigabit Ethernet interface, enter the keyword

twentyFiveGigE

then the

stack/slot/port/subport information.

•

For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE

then the stack/

slot/port[/subport] information.

•

For a 50-Gigabit Ethernet interface, enter the keyword

fiftyGigE

then the stack/

slot/port/subport information.

•

For a 100-Gigabit Ethernet interface, enter the keyword

hundredGigE

then the

stack/slot/port information.

•

For a port channel interface, enter the keywords

port-channel

then a number.

•

For a VLAN interface, enter the keyword

vlan

then a number from 1 to 4094.

in | out

Identify whether ACL is applied on the ingress or egress side.

vrf

vrf-name

(Optional) Enter the keyword vrf and then the name of the VRF to view the IP
accounting information on either a default or a non-default VRF.

Command Modes

•

EXEC

•

EXEC Privilege

Command History

This guide is platform-specific. For command information about other platforms, see the relevant

Dell Networking

OS Command Line Reference Guide

Version

Description

9.11(0.0)

Updated the show command output to include monitor option.

9.10(0.0)

Introduced on the S6100-ON.

9.8(1.0)

Introduced on the Z9100–ON.

9.8(0.0P5)

Introduced on the S4048-ON.

9.8(0.0P2)

Introduced on the S3048-ON.

9.7(0.0)

Introduced on the S6000–ON.

9.2(1.0)

Introduced on the Z9500.

9.0.2.0

Introduced on the S6000.

8.3.19.0

Introduced on the S4820T.

8.3.11.1

Introduced on the Z9000.

8.5.1.0

Added support for the 4-port 40G line cards.

8.3.7.0

Introduced on the S4810.

7.6.1.0

Introduced on the S-Series.

7.5.1.0

Introduced on the C-Series.

6.2.1.1

Introduced.

190

Access Control Lists (ACL)

Содержание S6100
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание S6100

Отзывы:

Похожие инструкции для S6100

Бренды по названию

Популярные бренды

Dell S6100, Руководство по настройке

Результаты поиска

Содержание S6100

Отзывы:

Похожие инструкции для S6100

Бренды по названию

Популярные бренды