Dell S6100, Руководство по настройке

Страница: 1444 / 1743

Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
Usage Information With password authentication enabled, you can authenticate using the local, RADIUS, or password
fallback order as configured.
ip ssh rekey
Configures the time rekey-interval or volume rekey-limit threshold at which to re-generate the SSH key during an SSH session.
Syntax ip ssh rekey [time rekey-interval ] [volume rekey-limit ]
To reset to the default, use
no ip ssh rekey [time rekey-interval ] [volume rekey-limit ]
command.
Parameters
time minutes Enter the keywords
time
then the amount of time in minutes. The range is from 10 to
1440 minutes. The default is 60 minutes
volume rekey-
limit
Enter the keywords volume then the amount of volume in megabytes. The range is from 1
to 4096 to megabytes. The default is 1024 megabytes
Defaults The default time is 60 minutes. The default volume is 1024 megabytes.
Command Modes CONFIGURATION mode
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
1444 Security