•
— enable 4-byte support for the BGP process.
bgp dampening
Enable BGP route dampening and configure the dampening parameters.
Syntax
bgp dampening [
half-life reuse suppress max-suppress-time
] [route-map
map-name
]
To disable route dampening, use the
no bgp dampening [
half-life reuse suppress max-
suppress-time
] [route-map
map-name
]
command.
Parameters
half-life
(OPTIONAL) Enter the number of minutes after which the Penalty is decreased. After the
router assigns a Penalty of 1024 to a route, the Penalty is decreased by half after the half-
life period expires. The range is from 1 to 45. The default is
15 minutes
.
reuse
(OPTIONAL) Enter a number as the reuse value, which is compared to the flapping
route’s Penalty value. If the Penalty value is less than the reuse value, the flapping route is
once again advertised (or no longer suppressed). The range is from 1 to 20000. The
default is
750
.
suppress
(OPTIONAL) Enter a number as the suppress value, which is compared to the flapping
route’s Penalty value. If the Penalty value is greater than the suppress value, the flapping
route is no longer advertised (that is, it is suppressed). The range is from 1 to 20000. The
default is
2000
.
max-suppress-time
(OPTIONAL) Enter the maximum number of minutes a route can be suppressed. The
default is four times the half-life value. The range is from 1 to 255. The default is
60
minutes
.
route-map
map-
name
(OPTIONAL) Enter the keyword
route-map
then the name of a configured route map.
Only
match
commands in the configured route map are supported.
Defaults
Disabled.
Command Modes
•
ROUTER BGP
•
ROUTER BGP-address-family
Command History
This guide is platform-specific. For command information about other platforms, see the relevant
Dell Networking
OS Command Line Reference Guide
.
Version
Description
9.8(0.0P5)
Introduced on the S4048-ON.
9.8(0.0P2)
Introduced on the S3048-ON.
9.7(0.0)
Introduced on the S6000–ON.
9.2(1.0)
Introduced on the Z9500.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
Border Gateway Protocol
351
Содержание S6100
Страница 1: ...Dell Command Line Reference Guide for the S6100 ON System 9 11 2 0P1 ...
Страница 474: ...protocol list ttl0 ttl1 Dell 474 Control Plane Policing CoPP ...
Страница 979: ... show lldp neighbors display the LLDP neighbors Link Layer Discovery Protocol LLDP 979 ...
Страница 1627: ... uplink state group creates an uplink state group and enables the tracking of upstream links Uplink Failure Detection UFD 1627 ...