Dell S6100, Руководство по настройке

Страница: 970 / 1743

• show lldp neighbors — display the LLDP neighbors.
advertise med guest-voice-signaling
To advertise a separate limited voice service for a guest user when the guest voice control packets use a separate network policy than the
voice data, configure the system.
Syntax advertise med guest-voice-signaling { vlan-id layer2_priority DSCP_value } |
{priority-tagged number }
To return to the default, use the
no advertise med guest-voice-signaling { vlan-id
layer2_priority DSCP_value } | {priority-tagged number }
command.
Parameters
vlan-id Enter the VLAN ID. The range is from 1 to 4094.
layer2_priority Enter the Layer 2 priority. The range is from 0 to 7.
DSCP_value Enter the DSCP value. The range is from 0 to 63.
priority-tagged
number
Enter the keywords
priority-tagged
, the Layer 2 priority, and then the DSCP value.
Defaults Unconfigured.
Command Modes CONFIGURATION (conf-lldp)
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Introduced on the S-Series.
7.6.1.0 Introduced on the C-Series and E-Series.
Related Commands
• debug lldp interface — debug LLDP.
970 Link Layer Discovery Protocol (LLDP)