Dell S6100, Руководство по настройке

Страница: 1717 / 1743

• For a VLAN interface, enter the keyword
vlan
, and then the VLAN ID. The VLAN ID
range is from 1 to 4094.
ipv6 (OPTIONAL) Enter the keyword
ipv6
to view only VRRP IPv6 groups.
vrf vrf-name (OPTIONAL) Enter the keyword
vrf
and then the name of the VRF to view active VRRP
groups corresponding to that VRF.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Added support for VRF.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.1 Introduced on the E-Series.
Usage Information The following describes the
show vrrp brief
command.
Item Description
Interface Lists the interface type, slot, and port of the configured VRRP group.
Grp Displays the VRRP group ID.
Pri Displays the priority value assigned to the interface. If you configured the
track
command to track that interface and you disable the interface, the cost is subtracted
from the priority value assigned to the interface.
Pre States whether preempt is enabled on the interface:
•
Y
= Preempt is enabled.
•
N
= Preempt is not enabled.
State Displays the operational state of the interface using one of the following:
Virtual Router Redundancy Protocol (VRRP) 1717