Dell S6100, Руководство по настройке

Страница: 375 / 1743

Usage Information
The
default-metric
command in BGP sets the value of the BGP MULTI_EXIT_DISC (MED) attribute for
redistributed routes only.
Related Commands
• bgp always-compare-med — enable comparison of all BGP MED attributes.
• redistribute — redistribute routes from other routing protocols into BGP.
deny bandwidth
Enables you to specify link band width extended-community attribute as the matching criteria to deny incoming or outgoing traffic.
Syntax deny bandwidth
To disable this setting, enter the
no deny bandwidth
command.
Parameters
bandwidth Enter the keyword bandwidth to specify extended-community attribute as the matching
criteria for denying traffic. The range is from 0 to 102400.
Defaults N/A
Command Modes EXTENDED COMMUNITY LIST
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S-Series and Z9500.
Related Commands
• permit bandwidth – specify link band width extended-community attribute as the matching criteria to
permitting incoming or outgoing traffic.
description
Enter a description of the BGP routing protocol.
Syntax description { description }
To remove the description, use the
no description { description }
command.
Parameters
description Enter a description to identify the BGP protocol (80 characters maximum).
Defaults none
Border Gateway Protocol 375