Dell S6100, Руководство по настройке

Страница: 279 / 1743

set local-preference
To set the BGP LOCAL_PREF attribute for routers within the local autonomous system, configure a filter.
Syntax set local-preference value
To delete a BGP LOCAL_PREF attribute, use the
no set local-preference
command.
Parameters
value Enter a number as the LOCAL_PREF attribute value. The range is from 0 to 4294967295.
Defaults Not configured.
Command Modes ROUTE-MAP
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
Usage Information The
set local-preference
command changes the LOCAL_PREF attribute for routes meeting the route map
criteria. To change the LOCAL_PREF for all routes, use the
bgp default local-preference
command.
Related Commands
• bgp default local-preference — change the default LOCAL_PREF attribute for all routes.
set metric
To assign a new metric to redistributed routes, configure a filter.
Syntax set metric [+ | -] metric-value
Access Control Lists (ACL) 279