Dell S6100, Руководство по настройке

Страница: 403 / 1743

Version Description
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage Information Loopback interfaces are up constantly and the BGP session may need one interface constantly up to stabilize the
session. The
neighbor update-source
command is not necessary for directly connected internal BGP
sessions.
Neighbors are sorted according to the source and destination ip addresses. If an update-source ip address exists,
then the source ip address determines the order in which the neighbors are displayed.
neighbor weight
Assign a weight to the neighbor connection, which is used to determine the best path.
Syntax neighbor { ip-address | peer-group-name } weight weight
To remove a weight value, use the
no neighbor { ip-address | peer-group-name } weight
command.
Parameters
ip-address Enter the IP address of the peer router in dotted decimal format.
peer-group-name Enter the name of the peer group to disable all routers within the peer group.
weight Enter a number as the weight. The range is from 0 to 65535. The default is 0 .
Defaults 0
Command Modes ROUTER BGP
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
Border Gateway Protocol 403