Dell S6100, Руководство по настройке

Страница: 392 / 1743

neighbor peer-group (creating group)
Allows you to create a peer group and assign it a name.
Syntax neighbor peer-group-name peer-group
To delete a peer group, use the
no neighbor peer-group-name peer-group
command.
Parameters
peer-group-name Enter a text string up to 16 characters long as the name of the peer group.
Defaults Not configured.
Command Modes ROUTER BGP
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage Information When you create a peer group, it is disabled (Shut mode).
Related Commands
• neighbor peer-group (assigning peers) — assign routers to a peer group.
• neighbor remote-as — assign a indirectly connected AS to a neighbor or peer group.
• neighbor shutdown — disable a peer or peer group.
neighbor peer-group passive
Enable passive peering on a BGP peer group, that is, the peer group does not send an OPEN message, but responds to one.
Syntax neighbor peer-group-name peer-group passive [ sessions ]
392 Border Gateway Protocol