Dell S6100, Руководство по настройке

Страница: 478 / 1743

Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.7(0.0) Introduced on the S6000-ON and Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.16.0 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information If you do not use the
statistics
parameter, both hardware and DCBx counters clear.
pfc-nodrop-priority l2-dlf drop
Configure to drop the unknown unicast packets flooding on lossless priorities.
Syntax pfc-nodrop-priority l2-dlf drop
To disable the feature, use the
no pfc-nodrop-priority l2-dlf drop
command.
Parameters
l2-dlf Enter the keywords
l2-dlf
to drop flooding traffic on lossless priorities.
drop Enter the keyword
drop
to enable the drop action.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the C9010, S6000, S6000–ON, Z9100–ON and S6100–ON.
Related Commands show hardware pfc-nodrop-priority — displays the packets drop count corresponding to the priority.
pfc no-drop queues
Configure the port queues that still function as no-drop queues for lossless traffic.
Syntax pfc no-drop queues queue-range
To remove the no-drop port queues, use the
no pfc no-drop queues
command.
Parameters
queue-range Enter the queue range. Separate the queue values with a comma; specify a priority range
with a dash; for example,
pfc no-drop queues 1,3
or
pfc no-drop queues 7
or
pfc no-drop queues 0,7
. The range is from 0 to 3.
Defaults No lossless queues are configured.
Command Modes INTERFACE
478 Data Center Bridging (DCB)