Dell S6100, Руководство по настройке

Страница: 477 / 1743

clear hardware pfc-nodrop-priority
Clear the drop statistics.
Syntax clear hardware pfc-nodrop-priority l2-dlf drops stack-unit stack-unit-number
port-set port-pipe
Parameters
stack-unit stack-
unit-number
Enter the keywords
stack-unit
and the stack unit number.
port-set port-pipe Enter the keywords
port-set
and port-pipe number. The port-pipe number is 0.
Command Modes
EXEC
EXEC Privilege
Command History
Version Description
9.10(0.0) Introduced on the C9010, S6000, S6000–ON, Z9100–ON and S6100–ON.
Related Commands
pfc-nodrop-priority l2-dlf drop — configures to drop the unknown unicast packets flooding on lossless priorities.
show hardware pfc-nodrop-priority — displays the packets drop count corresponding to the priority.
clear pfc counters
Clear the PFC TLV counters and PFC statistics on an interface or stack unit.
Syntax clear pfc counters [ interface-type | stack-unit { unit number | all } all stack-
ports all}]
Parameters
port-type Enter the keywords
port-type
then the interface information. Enter the subport
number if a 40G port is fanned-out into 10G ports.
stack-unit unit
number
Enter the keywords
stack-unit
then the stack-unit number to be cleared.
all stack-ports all Enter the keywords
all stack-ports all
to clear the counters on all interfaces.
statistics Enter the keyboard
statistics
to clear the hardware PFC counters.
Defaults none
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100-ON.
Data Center Bridging (DCB) 477