Dell S6100, Руководство по настройке

Страница: 359 / 1743

Version Description
9.2(1.0) Introduced on the Z9500.
Usage Information
The updates are sent to all the neighbors in the peer-group and all the neighbors have the same attributes including
next-hop.
Enabling or disabling outbound optimization dynamically resets all neighbor sessions.
When you enable outbound optimization, all peers receive the same update packets. Also, the next-hop address,
which is chosen as one of the addresses of the neighbor's reachable interface, is the same for all peers.
bgp recursive-bgp-next-hop
Enable next-hop resolution through other routes learned by BGP.
Syntax bgp recursive-bgp-next-hop
To disable next-hop resolution, use the
no bgp recursive-bgp-next-hop
command.
Defaults Enabled
Command Modes ROUTER BGP
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
7.2.1.0 Introduced.
Usage Information
This command is a knob to disable BGP next-hop resolution using BGP learned routes. During the next-hop
resolution, only the first route that the next-hop resolves through is verified for the route’s protocol source and is
checked if the route is learned from BGP or not.
Border Gateway Protocol 359