Dell S6100, Руководство по настройке

Страница: 1036 / 1743

Version Description
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, and Z9000 switches.
Related Commands
• ipv6 nd ra-guard enable — configure the RA guard related commands.
• ipv6 nd raguard policy policy-name — define the RA guard policy name and enter the RA guard policy
configuration mode.
match ra
Enable verifying either of the configured source IPv6 address or prefix address or the source MAC address in the inspected messages. If
this command is not configured, the verification process is bypassed.
Syntax match ra {ipv6-access-list name | ipv6-prefix-list name | mac-access-list name }
To reset the access list, use the
no match ra{ipv6-access-list | ipv6-prefix-list | mac-
access-list}
command.
Parameters
ipv6–access-list
name
Enter the keywords
ipv6–access-list
then the access-list name. The access-list
name allows a maximum of 140 characters.
ipv6–prefix-list
name
Enter the keywords
ipv6–prefix-list
then the prefix-list name. The prefix-list name
allows a maximum of 140 characters.
ipv6–mac-access-
list
name
Enter the keywords
ipv6–mac-access-list
then the mac-access-list name. The
mac-access-list name allows a maximum of 140 characters.
Defaults None
Command Modes POLICY LIST CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.11(0.0) Introduced on the C9010.
9.10(0.0) Introduced on the S6100-ON.
9.9(0.0) Introduced on the Z9500.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, and Z9000 switches.
Related Commands
• ipv6 nd ra-guard enable — configure the RA guard related commands.
1036 Neighbor Discovery Protocol (NDP)