Dell S6100, Руководство по настройке

Страница: 334 / 1743

ip route bfd
Enable BFD for all neighbors configured through static routes.
Syntax ip route bfd [prefix-list prefix-list-name ] [interval interval min_rx min_rx
multiplier value role {active | passive}]
To disable BFD for all neighbors configured through static routes, use the
no ip route bfd [prefix-list
prefix-list-name] [interval interval min_rx min_rx multiplier value role
{active | passive}]
command.
Parameters
prefix-list prefix-list-
name
(Optional) Enter the keyword prefix-list followed by the name of the prefix list to
enable or disable BFD on specific neighbors.
interval milliseconds (OPTIONAL) Enter the keywords
interval
to specify non-default BFD session
parameters beginning with the transmission interval. The range is from 50 to 1000. The
default is
200 .
min_rx milliseconds Enter the keywords
min_rx
to specify the minimum rate at which the local system
receives control packets from the remote system. The range is from 50 to 1000. The
default is
200 .
multiplier value Enter the keywords
multiplier
to specify the number of packets that must be missed
in order to declare a session down. The range is from 3 to 50. The default is 3 .
role [active |
passive] Enter the role that the local system assumes:
•
Active
— active system initiates the BFD session. Both systems can be active for
the same session.
•
Passive
— passive system does not initiate a session. It only responds to a request
for session initialization from the active system.
The default is Active .
Defaults See Parameters .
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.11(0.0) Introduced the
prefix-list
keyword.
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.3.(0.0) Introduced on S6000.
9.2(1.0) Introduced on the Z9500.
334 Bidirectional Forwarding Detection (BFD)